Bioquell Integrated Building Decontamination System illustration

Bioquell Integrated Building Decontamination System
(IBDS)

Do you need to routinely bio-decontaminate multiple rooms in your facility? If so, the Bioquell Integrated Building Decontamination System is a great solution. Once installed, this system makes it easy to bio-decontaminate labs, pharmaceutical fill lines, air locks, pass-throughs, storage areas, and more.

How The System Works

  1. Bioquell hydrogen peroxide vapor generators are installed in a technical area outside of classified zone.
  2. Hydrogen peroxide vapor is generated from Bioquell Hydrogen Peroxide Sterilant* and distributed into rooms, either through your building’s HVAC system, or through a dedicated network of pipes and nozzles. The vapor achieves a 6-log kill sporicidal kill on exposed surfaces.
  3. Once the bio-decontamination phase of the cycle is complete, Bioquell catalyst units rapidly break down the H2O2 vapor into water vapor and oxygen. Your building’s HVAC system can be also be used to help remove the vapor.

Following installation, every Integrated Building Decontamination System undergoes rigorous testing and validation, to ensure optimal performance.


*EPA Reg. No. 72372-1-86703

Ecolab Bioquell Integrated Building Decontamination Service illustration

Why Choose Bioquell Integrated
Building Decontamination System

Bioquell icons

Effective

Validated bio-decontamination cycles ensure a 6-log kill.

Bioquell icons

Fully Integrated

There’s no mobile equipment to set up or store. We distribute the hydrogen peroxide vapor either through your building’s ventilation system, or with a dedicated network of pipes. The system will interface with your building management system, so you can run decontamination cycles with the touch of a button.

Bioquell icons

Efficient

Rapid bio-decontamination cycles, no equipment to set up or put away, and the ability to run the system overnight means less downtime.


Related Products

Bioquell's L-4 at angle showing front and right side with top component on.

Bioquell L-4

In an Integrated Building Decontamination System, the Bioquell L-4 hydrogen peroxide vapor generator works behind the scenes to purify the selected space.

Bioquell Image

Bioquell Hydrogen Peroxide Sterilant*

This is a 35% aqueous hydrogen peroxide solution used in Bioquell technology to generate hydrogen peroxide vapor, which achieves a 6-log sporicidal kill on exposed surfaces.


*EPA Reg. No. 72372-1-86703

Bioquell_AerationUnitLarge.jpg

Aeration Module

When you’re unable to use your building’s HVAC system to remove hydrogen peroxide vapor after bio-decontamination, we’ll install this slim wall- or ceiling-mounted unit to do the job.

Contact Us

Contact Ecolab to learn how the Bioquell IBDS can support your operation and put you at the forefront of compliance, product safety and operational excellence.

Contact Ecolab Life Sciences

Ecolab Life Sciences is a trusted partner for quality, safety and efficiency in biopharmaceutical manufacturing. Contact us to learn how we can help you achieve your goals and keep you on the cutting edge.

* indicates required field

By checking "Yes", you are agreeing that Ecolab may contact you via email with promotional offers, updates, and other information. If you wish to continue your customer relationship without receiving marketing communication, you may submit your information without checking this box.

Data Privacy Concerns? See our Privacy Policy.